Features of time characteristics of diffusion properties of polymer modified film materials for technical application

Authors

  • N. I. Domantsevych Lviv University of Trade and Economics
  • B.P. Yatsyshyn Lviv University of Trade and Economics
  • M.N. Kril’ Lviv University of Trade and Economics

DOI:

https://doi.org/10.15330/pcss.19.1.95-99

Keywords:

polymer materials, polyethylene, oxygen permeability, surface structure

Abstract

The changes of the oxygen permeability of packings from polymeric film materials intended for prolonged storage of metal products have been investigated. High indexes of initial oxygen permeability were recorded due to insecure insulating properties of weld seams, as well as increased diffusion characteristics after the third year of exploitation, The most characteristic structural defects, which emerging in polyethylene modified materials during the period of prolonged storage , have been identified by means of electron microscopic studies.

References

[1] ISO 2556:2001 (2016). Plastics. - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. - Manometric method.

[2] ASTM D 1434-82 (2003). Standard test method for determining gas permeability characteristics of plastic film and sheeting.

[3] W. Dirk. Information resource: www.pharmtech-expo.ru/.../325885b1-2ab8-48e3-9cf7-9d9

[4] L. K. Massey. Permeability properties of plastics and elastomers: a guide to packaging and barrier materials (Plastics Design Library (William Andrew Publishing), 2003).

[5] V. Siracusa. International Journal of Polymer Science, V. 2012, 11 (2012).

[6] L. W. McKeen. Permeability properties of plastics and elastomers (Elsevior, Amsterdam – Tokyo, 2017).

[7] D. H. Weinkauf, D. R. Paul. Barrier Polymers and Structures (Chapter 3), 423, 60, (1990).

[8] J. G. A. Bitter, Desalination, 51, 19 (1984).

[9] P. Dias, Y. J. Lin, A. Hiltner et al. Applied Polymer Science, 107 (3), 1730 (2008).

[10] C. M. Laot. Diss. D.Ph. (Virginia Polytechnic Institute and State University, Blacksburg (Virginia), 2001).

[11] Plastic Packaging (WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2008).

[12] N. I. Domantsevych, Physics and Chemistry of Solid State, 1(2), 273 (2000).

[13] S.V. Genel, A.P.Patraki, S.Sh. Komar et al., Plast.massy, 12, 63, (1965).

[14] N. I. Domantsevych, B. P. Yatsyshyn, Physics and Chemistry of Solid State, 4(2), 323 (2003).

Published

2018-03-15

How to Cite

Domantsevych, N. I., Yatsyshyn, B., & Kril’, M. (2018). Features of time characteristics of diffusion properties of polymer modified film materials for technical application. Physics and Chemistry of Solid State, 19(1), 95–99. https://doi.org/10.15330/pcss.19.1.95-99

Issue

Section

Review