Formation of the Sputtered Phase of PbTe Crystals by Ar+ Plasma and Re-deposition of the Sputtered Species at Secondary Neutral Mass Spectrometry Conditions


  • D.M. Zayachuk Lviv Polytechnic National University
  • V.E. Slynko Frantsevich Institute for Problems of Materials Science NASU, Chernivtsy branch
  • A. Csik Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI)



Sputtering, re-deposition, nucleation, semiconducting lead compounds


Formation of the Pb and Te sputtered phase under exposure of the lateral surface of PbTe crystals grown from melt by the Bridgman method by Ar+ plasma at Secondary Neutral Mass Spectrometry (SNMS) conditions and re-deposition of the sputtered species on the sputtering crystal surface are investigated. Experimental evidence of mutual influence of the sputtering and re-deposition processes on each other during prolonged depth profiling of PbTe crystals is presented. Sputtering of the PbTe crystal surface forms the strongly supersaturated sputtered phase of Pb and Te. Re-deposition of the Pb and Te sputtered atoms on the crystal surface results in oscillations of sputtering rate of PbTe crystal and changes of average intensity of Pb and Te sputtering over sputtering time. A possible role of both the sub-critical nuclei of newly re-deposited phase and the re-deposited surface structures of post-critical sizes in generation of the features of PbTe crystal sputtering is discussed. It is concluded that formation and re-sputtering of the sub-critical nuclei of re-deposited phase leads to the oscillations of sputter yields of Pb and Te. Growth and re-sputtering of the re-deposited surface structures of post-critical sizes lead to changes of average values of Pb and Te sputter yields.


[1] A. R. González-Elipe, F. Yubero and J. M. Sanz: Low Energy Ion Assisted Film Growth (Imperial Collage Press, London, 2003).
[2] O. Auciello, J. Engemann, Multicomponent and Multilayered Thin Films for Advanced Microtechnologies: Techniques, Fundamentals and Devices(Springer Science & Business Media,2012).
[3] Nanofabrication by Ion-Beam Sputtering: Fundamentals and Applications, Ed. by Tapobrata Som, Dinakar Kanjilal (Pan Stanford Publishing, 2013).
[4] H. Oechsner, Secondary Neutral Mass Spectrometry (SNMS) and Its Application to Depth Profile and Interface Analysis. In: Thin Film and Depth Profile Analysis, Ed. by Oechsner H, Springer-Verlag, 1984, p. 63-86.
[5] H. Oechsner, Nuclear Instruments and Methods in Physics Research B 33, 918 (1988).
[6] I. V. Veryovkin, W. F. Calaway, J. F. Moore, M. J. Pellin, J. W. Lewellen, Y. Li, S. V. Milton, B. V. King, M. Petravic, Applied Surface Science 231-232, 962 (2004).
[7] T. Albers, M. Neumann, D. Lipinsky, A. Benninghoven, Applies Surface Science 70-71, 49 (1993).
[8] T. A. Dang, T. A. Frist, Surface and Coatings Technology 106, 60 (1998).
[9] G. L. Katona, Z. Berényi, L. Péter, K. Vad,Vacuum 82/2, 270 (2007).
[10] T. Schneider, M. Sommer, J. Goschnick, Applied Surface Science 252/1, 257 (2005).
[11] Vasile-Dan Hodoroaba, Wolfgang E.S Unger, Holger Jenett, Volker Hoffmann, Birgit Hagenhoff, Sven Kayser, Klaus Wetzig, Applied Surface Science 179/1-4, 30 (2001).
[12] D. M. Zayachuk, O. S. Ilyina, A. V. Pashuk, V. I. Mikityuk, V. V. Shlemkevych, A. Csik, and D. Kaczorowski, J Cryst Growth 376, 28 (2013).
[13] D. M. Zayachuk, E. I. Slynko, V. E. Slynko, and A. Csik, Materials Letters 173, 167 (2016).
[14] D. M. Zayachuk, V. E. Slynko, and A. Csik, Physics and Chemistry of Solid State 17, 336 (2016).
[15] P. Sigmund, Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets, Phys. Rev. 184, 383 (1969).
[16] P. Sigmund, Elements of Sputtering Theory. In: Nanofabrication by Ion-Beam Sputtering. T. Som, D. Kanjilal (Pan Stanford Publishing, 2013).
[17] L. C. Feldman, J. W. Mayer, Fundamentals of Surface and Thin Film Analysis (North-Holland, 1986).
[18] Handbook of Thin Film Technology, Ed. by L. I. Maissel and R. Glang, V. 2 (McCraw Hill Hook Company, 1970).



How to Cite

Zayachuk, D., Slynko, V., & Csik, A. (2017). Formation of the Sputtered Phase of PbTe Crystals by Ar+ Plasma and Re-deposition of the Sputtered Species at Secondary Neutral Mass Spectrometry Conditions. Physics and Chemistry of Solid State, 18(1), 21–28.



Scientific articles